# ◾ How to use the Send to Screen function ## Two ways of using Send to Screen There are **two kinds** of output for the [**Send to Screen**](/doc/send-to-screen-dPEzWpmeyF) function: :::info 1. **Display monitor** 2. TouchPro **Patient monitor** of the JUNO simulator ::: ### Content upload Content can only be uploaded * within an **SCE** (for the display monitor) * or via **Maestro** (for the JUNO/Patient monitor). In the former case, for the content to be available, the SCE, including that content, must be assigned to the recording. An SCE can only be linked to a recording by scheduling an event; consequently, the Send to Screen feature is only possible via **Event for recording**. :::warning If a JUNO simulator (Maestro-based) is connected, content uploaded via Maestro will be available for sending. ::: ### **Criteria for the function to work** * **Content** has to be uploaded within a specific SCE or via Maestro (to the JUNO simulator) * **A monitor/ decoder** AND/ OR **JUNO simulator** connected and assigned to the room * **An event** has to be scheduled in that specific room with that specific SCE assigned to it :::info **The Send to Screen function** is only available for Elevate Healthcare simulators, not third-party simulators. ::: # Uploading content 1. Within the [**SCE Management**](/doc/sce-management-Q1pfDRDIed) module, navigate to the **Edit SCE** surface of the desired SCE by highlighting it and clicking the **Edit SCE** button in the top right corner of the **SCE Details** panel. 2. Open the **Media** tab by clicking the corresponding title on the left. 3. Drag and drop or browse and select the file you intend to upload. ![](https://outline-production-attachments.s3-accelerate.amazonaws.com/uploads/48ddf0a7-308b-4fe9-b28a-e3ce1797eaa8/859043a5-2243-4077-b5e0-674e9e8e3ff5/sce%20design_media%20item.PNG?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Content-Sha256=UNSIGNED-PAYLOAD&X-Amz-Credential=AKIA4EOUDTOVUICLPZ4P%2F20260909%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20260909T151500Z&X-Amz-Expires=86400&X-Amz-Signature=a3d29a7c14e96d4f778288bfeab0599a64efb3c3182f5f7e6d91fbf8f777b05d&X-Amz-SignedHeaders=host&x-amz-checksum-mode=ENABLED&x-id=GetObject " =450x373.5") # Assigning a device for displaying the content 1. On the [**Rooms**](/doc/rooms-wHlWqgW8Zy) tab of the [**System** module](/doc/system-module-4DfmyZ4GUl), click the cogwheel for the desired room. 2. In the **Room Settings** pop-up, select the device to display the content from the **Send to Screen source** drop-down(s). ![](https://outline-production-attachments.s3-accelerate.amazonaws.com/uploads/48ddf0a7-308b-4fe9-b28a-e3ce1797eaa8/993c96ab-2ced-456f-8c95-8b76e8e98b0a/decoder%20added%20to%20room_ESS.PNG?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Content-Sha256=UNSIGNED-PAYLOAD&X-Amz-Credential=AKIA4EOUDTOVUICLPZ4P%2F20260909%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20260909T151500Z&X-Amz-Expires=86400&X-Amz-Signature=c499dfe9392793150a126b6da6ce310a0dd9b609915a2e9fd54329a29aaadffb&X-Amz-SignedHeaders=host&x-amz-checksum-mode=ENABLED&x-id=GetObject " =1515x743") :::success **NOTE:** Monitors used for displaying content are treated as cameras in LearningSpace; therefore, connecting such a device must be completed on the **Cameras** tab. ::: :::warning ***IMPORTANT:*** The TouchPro **Patient monitor** can only be assigned as a Send to Screen destination in the ***Send to Screen source #2*** drop-down menu (the second drop-down). ![](https://outline-production-attachments.s3-accelerate.amazonaws.com/uploads/48ddf0a7-308b-4fe9-b28a-e3ce1797eaa8/5943d196-223d-4490-b724-310f8b498299/juno%20added%20PM_ESS.PNG?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Content-Sha256=UNSIGNED-PAYLOAD&X-Amz-Credential=AKIA4EOUDTOVUICLPZ4P%2F20260909%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20260909T151500Z&X-Amz-Expires=86400&X-Amz-Signature=cc341b5c932b8761d1d1e04d1b4d8be0b2117be563904989674d238ba3674b4a&X-Amz-SignedHeaders=host&x-amz-checksum-mode=ENABLED&x-id=GetObject " =1515x1422") ::: 3. **Save** the setup. :::warning ***IMPORTANT:*** When scheduling the event, make sure that the room to which the displaying device has been assigned is used as the location of the scheduled simulation event. ::: # Recording Scheduled Events See the relevant description about [**scheduling an event**](/doc/scheduling-a-stand-alone-event-vQbg9pxlct). ![](https://outline-production-attachments.s3-accelerate.amazonaws.com/uploads/48ddf0a7-308b-4fe9-b28a-e3ce1797eaa8/7effcee7-4855-46cc-b288-58be779d0ef6/event%20with%20sce%20with%20media.PNG?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Content-Sha256=UNSIGNED-PAYLOAD&X-Amz-Credential=AKIA4EOUDTOVUICLPZ4P%2F20260909%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20260909T151500Z&X-Amz-Expires=86400&X-Amz-Signature=5117a748b8b301fd6b417c2cd181f0e40587030c62d9c317b7fdb3fe23c93d95&X-Amz-SignedHeaders=host&x-amz-checksum-mode=ENABLED&x-id=GetObject " =630x226") ## Send to Screen - from SCE Once an **event is scheduled** in a room with a displaying device and an SCE containing the media is assigned, the uploaded media file will be displayed during the event's **recording**. ![](https://outline-production-attachments.s3-accelerate.amazonaws.com/uploads/48ddf0a7-308b-4fe9-b28a-e3ce1797eaa8/7d5f674c-880d-4518-a103-d99657f1ec2b/Send%20to%20screen_Decoder_GIF.gif?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Content-Sha256=UNSIGNED-PAYLOAD&X-Amz-Credential=AKIA4EOUDTOVUICLPZ4P%2F20260909%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20260909T151500Z&X-Amz-Expires=86400&X-Amz-Signature=57a37199ebe8d7000551f70d419e4c5acd90296bb3ba2b77de94e8e6b2fe7c1d&X-Amz-SignedHeaders=host&x-amz-checksum-mode=ENABLED&x-id=GetObject " =405x383") ![](https://outline-production-attachments.s3-accelerate.amazonaws.com/uploads/48ddf0a7-308b-4fe9-b28a-e3ce1797eaa8/62c49611-250f-42d7-b55a-83a5550938af/mini%20patient%20monitor.PNG?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Content-Sha256=UNSIGNED-PAYLOAD&X-Amz-Credential=AKIA4EOUDTOVUICLPZ4P%2F20260909%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20260909T151500Z&X-Amz-Expires=86400&X-Amz-Signature=e271ff39aba70973cd7ae92c7abe7a5a2a2f4be0d152384a18c1840fef89e561&X-Amz-SignedHeaders=host&x-amz-checksum-mode=ENABLED&x-id=GetObject " =632.5x132") :::tip The Send to Screen widget can be **minimized** or **hidden** to utilize space on the screen better: ![](https://outline-production-attachments.s3-accelerate.amazonaws.com/uploads/48ddf0a7-308b-4fe9-b28a-e3ce1797eaa8/a803c0c2-b506-4dd7-9791-90f1887dff6a/hide%20sent%20to%20screen%20GIF.gif?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Content-Sha256=UNSIGNED-PAYLOAD&X-Amz-Credential=AKIA4EOUDTOVUICLPZ4P%2F20260909%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20260909T151500Z&X-Amz-Expires=86400&X-Amz-Signature=25d819b6f09fe8c2046af2f45f22a05d72007f17e4ab346573c576f1f7151e99&X-Amz-SignedHeaders=host&x-amz-checksum-mode=ENABLED&x-id=GetObject " =530x177") ::: ## Send to Screen - from Simulator (Maestro) :::warning ***NOTE:*** For the JUNO (Maestro) **media content** to be displayable, it is sufficient to **connect the JUNO simulator** (with media content); no SCE is required, so no scheduling is required; the content will be displayable once the recording is started (manually). ::: :::tip For more information, visit our [Recording Module](/doc/recording-module-aRoJ6T1EhN), [Recording - FAQ](/doc/recording-faq-pj61mpQJ5U), and [Practical Recording](/doc/recording-practical-VJnwNPrlxO) pages. ::: --- **Documents** - [User Guide](https://kb.learningspace.elevatehealth.net/s/ess-hs/doc/user-guide-QPZfKJ0BV1) - [FAQ](https://kb.learningspace.elevatehealth.net/s/ess-hs/doc/faq-AZnS7tDFgM) - [Release Notes](https://kb.learningspace.elevatehealth.net/s/ess-hs/doc/release-notes-fqaGSPScxH) - [iPad support - Technical information](https://kb.learningspace.elevatehealth.net/s/ess-hs/doc/ipad-support-technical-information-iHec00YAzm) - [Customer Aftercare One-Pager](https://kb.learningspace.elevatehealth.net/s/ess-hs/doc/customer-aftercare-one-pager-GOIZYTEgud) - [Preventing Copy-Paste in LearningSpace](https://kb.learningspace.elevatehealth.net/s/ess-hs/doc/preventing-copy-paste-in-learningspace-uEubHwXVD2)