# ◾ How can I set up a new room in LearningSpace?

Within the **LearningSpace system**, a simulation environment **corresponds to a Room**. **Recording** within LearningSpace is **only possible in Rooms** set up within the system.  
**Setting up a room** entails:

* adding them to the system **with a specific name**,
* then assigning the **cameras, manikin, DAK**
* or assigning other **A/V devices** intended to be used during the simulation event.


:::warning
**Room setup** should be completed **after all devices** intended to be used in the simulation environment **are physically connected and configured** on the corresponding tab(s) of the **System** (e.g., cameras added on the Cameras tab).

:::

 ![](https://outline-production-attachments.s3-accelerate.amazonaws.com/uploads/48ddf0a7-308b-4fe9-b28a-e3ce1797eaa8/267b6d3b-2431-47f3-941d-e26a1d1bd4af/ad%20new%20room%20CUT%20GIF.gif?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Content-Sha256=UNSIGNED-PAYLOAD&X-Amz-Credential=AKIA4EOUDTOVUICLPZ4P%2F20260909%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20260909T151500Z&X-Amz-Expires=86400&X-Amz-Signature=c5cafcd65cf74d5c289db5e430eec48457fe8c71bc583b4f0f35d976a6c48b5d&X-Amz-SignedHeaders=host&x-amz-checksum-mode=ENABLED&x-id=GetObject)


:::success
Room management depends on the hardware system. For example, a LearningSpace ONE Box is a one-room system, so **no additional room can be added**.

:::


1. To add a new room within the system, click the **Add New Room** button at the bottom left corner of the **Rooms** tab.  
   The **Room Settings** pop-up appears.
2. Enter the **room number** and **description. You can also add a Separate In-room Intercom device, a Separate Facilitator Intercom device (e.g., headphones),** and a **Simlog uploader station** to the room here.
3. Click the **Add** button. The **Room Settings** pop-up automatically **expands** with other details.
4. **Assign the devices** desired to be added to the room by selecting them in the corresponding drop-down menus.  
   For more information on the drop-down menus of the **Rooms Settings** pop-up, see [**Rooms**](/doc/rooms-wHlWqgW8Zy).

   
:::info
   ***NOTE:*** Depending on the screen size, you may need to scroll down to see all the assignable devices.

   :::
5. Click **Save** to save and add the new room. Once the data have been saved, the list of rooms will be displayed with the new room added.


:::success
Additional room setting information can be added or modified at any time by clicking the **cogwheel** for a desired room, prompting the **Room Settings** pop-up to appear.

:::


:::tip
To delete a room (including all assignment settings), open the Room Settings pop-up and click the **Delete** button.

:::

---

**Documents**

- [User Guide](https://kb.learningspace.elevatehealth.net/s/ess-hs/doc/user-guide-QPZfKJ0BV1)
- [FAQ](https://kb.learningspace.elevatehealth.net/s/ess-hs/doc/faq-AZnS7tDFgM)
- [Release Notes](https://kb.learningspace.elevatehealth.net/s/ess-hs/doc/release-notes-fqaGSPScxH)
- [iPad support - Technical information](https://kb.learningspace.elevatehealth.net/s/ess-hs/doc/ipad-support-technical-information-iHec00YAzm)
- [Customer Aftercare One-Pager](https://kb.learningspace.elevatehealth.net/s/ess-hs/doc/customer-aftercare-one-pager-GOIZYTEgud)
- [Preventing Copy-Paste in LearningSpace](https://kb.learningspace.elevatehealth.net/s/ess-hs/doc/preventing-copy-paste-in-learningspace-uEubHwXVD2)